Nine formwork facings for every application – from high-performance panels for the most demanding exposed concrete finishes to cost-effective standard solutions for less critical uses of formwork. NOE supplies the right facing, advises on the correct choice and keeps all standard sizes in stock.
Home Formwork technology Formwork systems Formwork & scaffolding accessories Formwork facings
Concrete staircases must comply with standards, have a precise finish and be cost-effective to manufacture – whether as individual staircases in residential construction or as mass-produced items in a precast plant. NOEstairs is designed precisely to meet these requirements: it offers infinitely adjustable tread width and rise, is equally suitable for left- and right-hand staircases, and features a steel structure that withstands numerous formwork cycles.
Thanks to prefabricated system components, NOEstairs saves a considerable amount of time every time it is reused. The adjustment mechanism for rise and run dimensions allows for quick and precise adjustment – without the need for modifications or special components.
High-quality formwork panel for smooth, non-textured exposed concrete surfaces – for walls and slabs. Core construction made from cross-glued birch veneer with a phenolic resin coating on both sides.
| Strengths | mm | 21 | 15 | 12 | 9 |
|---|---|---|---|---|---|
| Formats up to | mm | 1500 × 3600 | 1500 × 3600 | 1500 × 3000 | 1500 × 3000 |
| Large format | mm | 2700 × 5300 | |||
| Surface | Phenolic resin coating, 220 g/m² (on both sides) | ||||
| Weight | kg/m² | 14,70 | 10,50 | 8,40 | 6,30 |
| Core design | glued birch plywood | ||||
| Veneer layers | 15 | 11 | 9 | 7 | |
Unfinished Brazilian pine plywood for the secondary use of formwork. Grade C+/C – an economical choice where there are no specific requirements regarding the concrete surface. Supplied in packs of 45 sheets.
| Strengths | mm | 21 |
|---|---|---|
| Formats up to | mm | 2500 × 1250 |
| Surface | raw | |
| Weight | kg/m² | 10,40 |
| Core design | Brazilian pine plywood | |
| Veneer layers | 7 | |
Not for formwork, but as a safe covering for scaffolding: this anti-slip film-faced plywood has a screen-printed pattern on one side and is smooth on the other – ensuring a non-slip working surface at height.
| Strengths | mm | 21 | 18 | 15 | 12 | 9 |
|---|---|---|---|---|---|---|
| Standard formats up to | mm | 2500 × 1250 | ||||
| Surface | Phenolic resin coating one page, 120 g/m², with screen-printed embossing, one sheet of 120 g/m² smooth paper |
|||||
| Weight | kg/m² | 14,70 | 12,80 | 10,50 | 8,40 | 6,30 |
| Core design | glued birch plywood | |||||
| Veneer layers | 15 | 13 | 11 | 9 | 7 | |
Three-layer pine formwork panel for walls and slabs with a sanded, raw surface. Creates a concrete finish with a subtle wood grain – ideal for use where the design calls for a natural wood grain effect in the concrete.
| Strengths | mm | 21 |
|---|---|---|
| Standard format up to | mm | on request |
| Surface | raw | |
| Weight | kg/m² | 10,80 |
| Core design | Pine | |
| Veneer layers | 3 | |
Large-format formwork panels made from highly compressed wood-based material with a sanded, absorbent surface. Specifically designed for low-porosity concrete surfaces with increased edge strength – and for use in the construction of sewage treatment works, water reservoirs and bridge construction.
| Strengths | mm | 21 | 10 |
|---|---|---|---|
| Standard format up to | mm | 5430 × 2050 | 2710 × 2050 |
| Surface | Surface classified as WGK 1 oiled with an environmentally friendly release agent |
||
| Weight | kg/m² | 16,80 | 8,00 |
Durable plastic composite construction with a very high proportion of recycled material. A 22 mm panel reduces CO₂ emissions by more than 16 kg/m² compared with a panel containing no recycled material. Fully recyclable and reusable.
| Strengths | mm | 16 | 22 |
|---|---|---|---|
| Standard format up to | mm | 1800 × 3600 | |
| Large format | mm | 1800 × continuous | |
| Weight | kg/m² | 10,7 | 13,2 |
High-quality formwork panel for smooth exposed concrete surfaces, made from a durable plastic composite construction with a polypropylene surface. Extremely sturdy and hard-wearing – available in two reinforcement variants.
| With glass fibre reinforcement | mm | 15,00 | 12,50 | 11,50 | 10,00 | 5,70 |
|---|---|---|---|---|---|---|
| Standard format up to | mm | 1200 × 4000 | ||||
| Weight | kg/m² | 12,80 | 10,60 | 9,50 | 9,00 | 5,60 |
| With aluminium reinforcement | mm | 10 – 27 |
|---|---|---|
| Standard format up to | mm | 1370 × 4000 |
| Weight | kg/m² | 8 – 19,6 |
Three-ply pine formwork panel for walls and slabs, with a planed surface and a melamine resin coating on both sides (140 g/m²). Produces a concrete finish with a subtle wood grain. The short side is available with a steel edge if required.
| Strengths | mm | 21 | ||
|---|---|---|---|---|
| Standard format up to | mm | 1500 × 500 | 2000 × 500 | 2500 × 500 |
| Surface | Melamine resin coating, 140 g/m² | |||
| Weight | kg/m² | 10,80 | ||
| Core design | Pine | |||
| Veneer layers | 3 | |||
Formwork facings made from glued poplar plywood with a phenolic resin coating on both sides (120 g/m²) for concrete surfaces with low load-bearing requirements. A cost-effective solution for minor uses of formwork. Supplied in packs of 45.
| Strengths | mm | 21 |
|---|---|---|
| Standard format up to | mm | 2500 × 1250 |
| Surface | Phenolic resin coating, 120 g/m² (on both sides) | |
| Weight | kg/m² | 11,20 |
| Core design | glued poplar plywood | |
| Veneer layers | 13 / 15 | |
Do you have any questions about choosing the right formwork facing or the correct formwork facing for your project? NOE offers practical advice – formwork facing, formwork and installation, all from a single source.